Our Harsh Environment electric slip rings are designed to withstand the extreme conditions that are often encountered in outdoor and marine applications. From wind turbines and outdoor pan-tilt heads to marine cable reels and down hole inspection equipment, these harsh environment electric slip rings are durable and reliable enough for even the most demanding applications.
To withstand the harshest environments often seen in outdoor and marine applications such as a wind turbines, marine cable reels, down hole inspection equipment, ROVs, and outdoor pan tilt heads. Constructed from stainless steel, the 200 series electrical slip ring is sealed to IP 65 sealed slip rings and the temperature rating is -40 to +80℃.
Standard Specifications
Number of Rings |
2-48 |
Voltage |
400 VAC |
Rated Current |
5 A/ring |
High Pot |
1000 VAC@60 Hz. |
Insulation Resistance |
>1000MΩ/500 VDC |
Operating Speed |
0-400 rpm |
Contact Materials |
Silver Alloy |
Housing Material |
Stainless Steel |
Bearings |
Stainless Steel |
Temperature Range |
-40 to +80 ℃ |
Protection |
IP65 |
Advantages ：
l IP65 sealed construction slip rings
l Stainless steel housing
l Long Life & High Reliability
l Extended operating range
l Resistant to salt water environment
l CE and RoHS Compliant
Typical Applications:
l Cable Reels
l Remotely Operated Vehicles
l Shipboard Devices
l Packaging Machinery
l Food and Beverage Machinery
l Down Hole applications
l Robotics
l Process Control Equipment
Proper Use and Mounting Instructions：
1) The rotor should be driven with a flexible drive coupling to accommodate any differences in the assembly and slip ring’s axis of rotation. Rubber tubing, heat shrink tubing, or a flexible coupling can be used. For applications that run at 5 rpm or less, the rotor leads can be used as the flexible coupling.
2) The slip ring’s bearings are not designed to support external or radial loads. The rotating parts should be supported in such a way that axial and radial forces applied to the slip ring bearings are minimized.
3) The slip ring should be protected from dust and moisture. If installed in an outdoor application, the slip ring should be designed to operate in a weather-proof enclosure.
4) Secure the leads so that they do not contact any surface of the equipment as it rotates. While routing the wires, do not allow the leads to apply any side loading to the slip ring.
FAQ
1). Why choose ByTune product?
We are ISO9001 certified company with strictly quality control system.
- Most of our test equipment are best advanced.
- Always prompt response.
- Long life product span.
- We offer competitive price with reliability
2). What signals could be transferred? Is Multi-signal capable?
It is very wide, such as USB, RS232, RS485, thermocouple, Ethernet, Servo, H1M1, video etc.