- Sn-Ag-Cu Solder
- 2017-12-27 20:45
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Pure Silver Solder
- 2017-12-25 19:03
- Silver silver solder has good process performance, high purity, brazing performance is good, can be processed into a variety of forms. It can be used for brazing copper and copper alloy, steel and stainless steel, etc.
- Silver Copper Alloy
- 2017-12-17 13:42
- Silver Copper alloys is a kind of silver-based solid solution. It has goodproperties such as appropriate melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity and electrical conductivity.
- Manganese Brass
- 2017-12-17 12:03
- Manganese brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well cleaned before brazing.The fluxes
- Silicon Bronze Brazing Alloy
- 2017-12-15 08:08
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The surface is bright and clean
- Flux Coating Silver Brazing Alloy
- 2017-11-21 06:01
- The silver brazing alloy can be made into flux coating brazing alloy. Flux coating silver brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption.
- Sn-Cu Solder
- 2017-11-13 14:46
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Flux Cored Silver Brazing Alloy
- 2017-11-11 01:59
- The silver brazing alloy can be made into flux cored brazing alloy. Flux cored silver brazing alloy is applicable to automatic brazing. It has higher production efficiency, saves the material consumption. And it can be used to braze without flux.
- Silver-aluminium Alloys
- 2017-10-24 07:09
- Aluminum alloy solders are applied for joinning aluminum to aluminum alloys. It is not suitable for joinning other metals as the oxide on the surface of aluminum solder is difficult to be removed, furthermore the brittle intermetallic compounds formed by
- Pure Copper Paste
- 2017-10-11 07:10
- Pure copper brazing can be made into paste. It is suitable for narrow gap and automatic brazing of complex components, and easy to use. The roduct is suitable for brazing copper, bronze and steel, etc.
- Silicon Brass
- 2017-10-10 19:37
- Silicon brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should
- Silver Power
- 2017-09-20 17:50
- The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。
- Tin Bronze Brazing Alloy
- 2017-09-19 20:37
- Tin bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.
- Sn-In Solder
- 2017-09-14 00:14
- Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta
- Powdered Brazing Flux
- 2017-08-19 08:04
- Flux has lower melting point than brazing filler metal, good surface activity. It can break or dissolve metallic oxides on the surface of work and brazing alloys during the process, which is good for the liquid brazing alloy wetting the surfaces to permit
- Brass Solder
- 2017-08-12 05:00
- Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well
- AgCuZn Brazing Alloy
- 2017-07-31 08:15
- Ag-Cu-Zn brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. It is used for brazing of some fe
- Phosphorus Tin Silicon Brazing Alloy
- 2017-07-25 17:38
- Copper phosphorus is principle elements of the product, with the tin, antimony and other elements. Brazing temperature is low. It is applied in the resistance brazing, flame brazing and high frequency brazing.
- Copper Nickel Alloys
- 2017-07-22 17:34
- Copper Nickel Alloysis applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc.
- Manganese Bronze Brazing Alloy
- 2017-07-22 15:39
- Manganese bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used.The wettability of brazer
